Page 10
The WallControl 10 - Security Administration Client (Pro Version Only)
The WallControl 10 - Security Administration Client allows Administrators to assign
a role allowing unrestricted access on one wall but assigned a role on another wall
which only allows the opening of pre-determined layouts.
program must be run to enable security protection for the application. To run the
Locate and double click on the
Program Files (x86) \WallControl 10\ Security Server\SecurityOnO
Start | All Programs | WallControl 10 - Security Administration Client
A WallControl 10-Pro serial dongle must be inserted into a vacant USB port. If the
dongle is removed or swapped, the Security Administration Client will not open and
an error message is displayed, therefore it is important the dongle is not removed.
The WallControl 10 Security Application
•
• Create and edit roles.
•
access to them.
• Assign roles to walls.
To Next Page
Loading...
