V130108E iBoot-G2+ Page 19
With AutoPing operational, the main iBoot-G2+ page will display the current status of this feature. The status
will be OK to indicate that iBoot-G2+ is receiving responses to the ping, or that the fail counter has not yet
been exceeded.
If the fail count has been exceeded, the status will change to FAIL. The Trigger Counter indicates the number
of times the AutoPing action has been triggered. A counter reset button is provided.
Note: All of the AutoPing Settings require a reboot of the iBoot-G2+, after clicking Save. A Reboot button will
appear at the bottom of the page. The new settings will not take effect until the unit is rebooted.
Reboot will not affect the power position of the iBoot-G2+. Upon Clicking Reboot, the Goodbye page
is displayed with a link to re-login.
To Next Page
Loading...
Need help?
General
