DataRemote POTS in a BOX CDS-9070 - Page 39

Copyright © 2016 - All rights reserved by DataRemote Incorporated
V1.0
The page 39 of 76
Revision Time: 2016-10-13
L2TP Server
L2TP Server Enable
Select to enable L2TP server.
Local IP Address
Set the IP address of L2TP server.
Pool Start Address
Set the IP pool start IP address which
will assign to the L2TP clients.
Pool End Address
Set the IP pool end IP address which
will assign to the L2TP clients.
Max MTU
Maximum Transmission Unit. It is the
identifier of the maximum size of
packet, which is possible to transfer in
a given environment.
Max MRU
Maximum Receiving Unit. It is the
identifier of the maximum size of
packet, which is possible to receive in
a given environment.
User Name
Set the username which will assign to
L2TP client.
Password
Set the password which will assign to
L2TP client.