Need help?Do you have a question about the Datex-Ohmeda Aespire View and is the answer not in the manual?
General| Brand | Datex-Ohmeda |
|---|---|
| Model | Aespire View |
| Category | Medical Equipment |
| Language | English |
Defines the system's primary purpose and applications.
Explains symbols found in the manual and on equipment.
Explains the use of bold, italics, and quotes in the manual.
Lists and defines common abbreviations used in the manual.
Details the various controls and physical components of the anesthesia system.
Describes the components of the Advanced Breathing System.
Details optional components for the Advanced Breathing System.
Explains the operation and settings of the vaporizer controls.
Details the Auxiliary Common Gas Outlet and its function.
Outlines the controls and interface for the ventilator functions.
Describes the information presented on the ventilator display screen.
Guides on how to navigate and use the system's menu interface.
Provides instructions for powering on the anesthesia system.
Details the procedure for initiating mechanical ventilation.
Explains how to perform manual ventilation using the system.
Guides on setting up the ventilator parameters and modes.
Explains how to use quick keys for setting adjustments.
Instructions for modifying ventilator modes and their associated settings.
Covers configuring and managing system alarms for patient safety.
Specific instructions for setting volume-related alarms.
Details how to set or change specific alarm limits.
Details the process for system setup and calibration procedures.
Procedures for daily checks before the first patient.
Procedures for checks performed before each patient.
Instructions for visually inspecting the entire system before use.
Verifies the functionality of the power failure alarm system.
Checks the integrity and function of the pipeline gas supply.
Tests the optional total flow sensing functionality.
Tests the function and pressure of gas cylinders.
Verifies the correct operation of gas flow controls.
Guides on correctly installing anesthetic vaporizers.
Tests for back pressure issues related to vaporizers.
Detects leaks within the low-pressure gas circuits.
Performs a specific test for negative low-pressure leaks.
Performs a specific test for positive low-pressure leaks.
Procedures to test and verify the proper function of alarms.
Tests the integrity and function of the breathing system components.
Tests the performance of the monitor and ventilator functions.
Explains the causes, priorities, and display of system alarms.
Describes how certain alarms continue to display after correction.
Provides a detailed list of system alarms, their causes, and actions.
Details alarms that stop ventilation or monitoring due to severe issues.
Lists the adjustable ranges and default settings for system alarms.
Procedures to test and verify the proper function of alarms.
Addresses common problems and solutions for the breathing system.
Guides on diagnosing and resolving electrical issues with the system.
Covers troubleshooting for problems related to pneumatic systems.
Outlines the policy regarding equipment repairs and service.
Provides a summary and schedule for recommended maintenance tasks.
Details maintenance procedures for the breathing system.
Instructions for replacing the oxygen sensor cell.
Guides on calibrating the oxygen sensor cell for accurate readings.
Procedure for zeroing the flow sensors for accurate measurements.
Advice on preventing water accumulation in the system.
Instructions for setting up the CO2 absorber canister.
Details how to make the necessary electrical connections for the system.
Explains the pneumatic connections required for system operation.
Provides steps for installing gas cylinders for supply.
Instructions on how to attach external equipment to the top of the machine.
Lists and describes the flow sensor module and its parts.
Details the exhalation valve assembly and its stock number.
Lists components of the breathing circuit module.
Provides details and stock numbers for the bellows assembly.
Describes the absorber canister and its available versions.
Lists components for the Anesthetic Gas Scavenging System (AGSS).
Details the components of the EZchange canister system.
Lists parts related to the condenser system.
Lists various test tools and spare parts for the system.
Explains the pneumatic circuits of the anesthesia system.
Details the specifications related to the system's pneumatic functions.
Presents the electrical block diagram of the anesthesia system.
Covers the electrical power requirements and ratings for the system.
Details the specifications for gas flow rates and ranges.
Provides specifications related to the breathing system's performance.
Lists the physical dimensions, weight, and weight limits of the system.
Specifies the required environmental conditions for operation and storage.
Details specifications for optional suction regulators.
Provides specifications for the optional auxiliary O2 flowmeter.
Explains the underlying principles and theory of the ventilator's operation.
Explains the theory behind the O2 monitoring system.
Describes the different ventilation modes available on the system.
Details the operating specifications for the ventilator.
Presents data on the accuracy of the ventilator's measurements.
Information regarding the system's electromagnetic compatibility.
Outlines electrical safety precautions and standards for the system.
Details the system's classification according to IEC 60601-1 standards.
Lists applicable standards the system complies with.
Lists the integral and non-integral components of the anesthesia system.
To Next Page