To Next PageTo Next Page
Need help?Do you have a question about the Datex-Ohmeda Cardiocap/5 Series and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Datex-Ohmeda |
| Model | Cardiocap/5 Series |
| Display | LCD |
| ECG | Yes |
| SpO2 | Yes |
| NIBP | Yes |
| CO2 | Yes |
| Agent Identification | Yes |
| Invasive Blood Pressure | Yes |
| Recorder | Optional |
| Connectivity | Serial |
| Power Supply | AC |
| Battery Life | Varies depending on configuration |
| Dimensions | Varies by configuration |
| Weight | Varies by configuration |
Information on the manual's purpose, scope, and structure.
Details the available models (F-MX, F-MXG) and their configurations.
Explains the internal hardware components and their interconnections.
Defines symbols used on the equipment, screens, and packaging.
Outlines critical warnings and cautions for safe operation and handling.
Lists the technical specifications for the F-MX and F-MXG frames.
Details specifications for various optional measurement modules.
Introduces the chapter's content on installing and checking the monitor.
Provides instructions for setting up the monitor, including component connections.
Guidance on selecting an appropriate and safe placement for the monitor.
Describes how to connect the monitor to printers, computers, and other devices.
Details the pin configurations for various monitor connectors.
Outlines procedures to verify the monitor's correct operation after installation.
Introduces planned maintenance procedures and their recommended frequency.
Lists and describes the specific checks and tasks for routine maintenance.
Lists monitor messages, their possible causes, and recommended actions.
Provides diagnostic charts for general monitor issues and specific parameters.
Details troubleshooting specific to optional measurement modules.
Introduces the monitor frames (F-MX, F-MXG) and software options.
Explains the function and structure of the AC/DC power supply unit.
Describes the function and block diagram of the DC/DC board.
Provides detailed information on the different voltage outputs of the power supplies.
Describes the central processing unit board and its components.
Details the display unit, keyboard, I/O board, and connectors.
Explains the function and operation of the optional built-in recorder.
Introduces the chapter on measurement parameters and options.
Explains the principles behind NIBP, ECG, Respiration, and Temperature measurements.
Details measurement principles for gas analysis, spirometry, and neuromuscular transmission.
Describes the components of the NESTPR unit for hemodynamic measurements.
Details components for enhanced and Nellcor-compatible pulse oximetry.
Lists and describes components for airway gas analysis and spirometry.
Describes the components related to neuromuscular transmission measurement.
Provides general guidelines and precautions for service personnel.
Instructions for installing monitor software using a PC card.
Step-by-step guides for replacing various hardware components.
Procedures for calibrating and adjusting monitor parameters and safety levels.
Introduces the service menus used for checking functions and troubleshooting.
Explains how to access the main service menu and enter passwords.
Describes menus for checking voltages, communication, configuration, and watchdog tests.
Details tests for alarm LEDs and function keys via the keyboard menu.
Provides access to menus for specific measurement parameters like Gas Unit, ECG, STP, NIBP, NMT.
Covers general gas unit data, gases menu, and spirometry menu.
Describes the service menu for ECG module tests and setup.
Details the service menu for STP module tests and calibration.
Explains menus for NIBP demo, calibration, safety valve, pulse valve, buttons/LEDs, pneumatics, and watchdog.
Covers the NMT menu for tests, settings, and data display.
Details menus for Nellcor and Datex-Ohmeda pulse oximetry options.
Accesses menus for memory modules and communication status.
Provides access to error, event, and alarm history logs.
Lists mechanical and electronic spare parts for F-MX and F-MXG frames.
Lists spare parts for the NESTPR unit and invasive pressure option.
Lists spare parts for airway gas measurement options.
Lists spare parts for the optional recorder.
Lists enclosure kits and spare parts for NMT and pulse oximetry options.
