Dave Smith Instruments Prophet Rev2 - Copying a Polyphonic Sequence between Layers

45
Prophet Rev2 User’s Guide
Sequencer
5. If you make a mistake, or simply want to re-enter a note or change
its velocity use the sequencer’s parameter knob to step backward or
forward to the step you want to edit.
6. To edit a note’s velocity numerically, hold down the record button and
turn the value knob.
7. To save the sequence, save the program by pressing the write button
twice.
Copying a Polyphonic Sequence Between Layers
You can copy a sequence from Layer A to Layer B and vice-versa. You can
also swap sequences between layers.
To copy a sequence on Layer A to Layer B:
1. Press both the split a|b button and the stack a+b button simultaneously.
2. Turn the parameter knob and select copy seq a to b.
3. Press the write button.
To copy a sequence on Layer B to Layer A:
1. Press both the split a|b button and the stack a+b button simultaneously.
2. Turn the parameter knob and select copy seq b to a.
3. Press the write button.
To swap the sequences on Layer A and Layer B:
1. Press both the split a|b button and the stack a+b button simultaneously.
2. Turn the parameter knob and select swap seq a and b.
3. Press the write button.