59
Prophet Rev2 User’s Guide
Pitch and Mod Wheels
Modulation Wheel
The mod wheel controls the amount of modulation for any program that
uses it as a modulation source. This allows you to “perform” modulation in
real time by moving the wheel. This is a great way to add expressiveness
to a sound or performance by using it to control vibrato, lter effects, and
potentially a lot more.
To choose a modulation destination for the Mod wheel:
1. In the modulation section, press the source button. Use the param-
eter knob next to the display to scroll to Mod Slot 1 if it’s not already
displayed.
2. Use the parameter knob to select the source eld. Use the value knob
to scroll through the various mod sources and choose mod wheel.
3. Use the parameter knob to select the dest eld. Use the value knob
to scroll through the various mod destinations and choose a parameter
(such as cutoff).
4. Hold down a note on the keyboard (or press the hold button and play a
note on the keyboard) and turn the mod wheel.
5. Use the parameter knob to select the amount eld. Use the value
knob to set the amount to your preference. Higher amount settings add
greater modulation the further you push the mod wheel. A negative
amount setting will apply modulation in the negative direction.
To Next Page
Loading...
