13
Function Description
Selector
Switch
Position
Functions and Instructions
Set Timer 2 - ON 4
SET THE COMPLETION TIME OF THE SECOND RUN TIME
SEQUENCE
Select the Timer 2- ON position on the selector switch. A number ‘4’ will
appear on the left of the screen.
This time is factory pre-set to 5pm. Proceed as per (a) in the ‘Set Clock’
instruction to change time.
To disable this timer, move up or down to 11:59PM. Press the UP button
one more time to turn OFF. NOTE: This step will also disable the time for
‘Set Timer 2 - OFF’.
Set Timer 2 - OFF 5
SET THE COMPLETION TIME OF THE SECOND RUN TIME
SEQUENCE
Select the Timer 2- OFF position on the selector switch. A number ‘5’ will
appear on the left of the screen.
This time is factory pre-set to 11pm. Proceed as per (a) in the ‘Set Clock’
instruction to change time.
Automatic ON 6
FILTRATION SYSTEM SWITCHES ON AND OFF AUTOMATICALLY
ACCORDING TO YOUR SET TIMES
Select the Automatic ON position on the selector switch. A number ‘6’
will appear on the left of the screen.
Manual ON 7
OVER-RIDES THE AUTOMATIC TIME CLOCK SETTINGS
& SWITCHES FILTRATION SYSTEM ON
Select the Manual ON position on the selector switch. A number ‘7’ will
appear on the left of the screen.
NOTE: Sanitisation will be constant until turned OFF or back to Automatic
ON. Over sanitisation may occur if left for long durations
OFF 8
OVER-RIDES THE AUTOMATIC TIME CLOCK SETTINGS
& SWITCHES FILTRATION SYSTEM OFF
Select the OFF position on the Selector switch. A number ‘8’ will appear
on the left of the screen.
NOTE: Filtration & sanitisation will cease. Not recommended for long
durations.
IMPORTANT. Certain local electrical regulations state “If the supply cord
is damaged, it must be replaced by a special cord available from the
manufacturer or its service agent”.
403165_AquaReviva_I&OI.indd 13 4/7/17 9:18 am
To Next Page
Loading...
