19
TROUBLE SHOOTING
No Chlorine Production - Check for:
1. Main power outlet switched off
2. Sanitiser not plugged into main outlet
3. Pump not plugged into Sanitiser
4. Time Clock set to Off position/Power switch turned Off
5. Sanitiser Output Control turned to “0” setting
6. Sanitiser fuse blown
7. Dirty Cell
8. Filter needs back washing
9. Flow switch not connected
10. ,QVXI¿FLHQWZDWHUÀRZWKURXJKFHOO
11. Running times incorrect
12. Main house fuse blown
13. Pump motor faulty
NOTES & SERVICE HISTORY
Low Chlorine Production - Check for:
1. Dirty Cell - clean if required
2. Filter needs back washing
3. Cell failing
4. Pool stabiliser too low
5. pH too high
6. TDS level too low
7. Running time inadequate
8. Sanitiser output control set too low.
403165_AquaReviva_I&OI.indd 19 4/7/17 9:18 am
To Next Page
Loading...
