Davey AquaReviva DAR20C

12
AUTOMATIC TIME CLOCK OPERATION
TIMER SETTING AND FUNCTIONS
SELECTOR SWITCH
POLARITY STATUS
FUSE 3A
AB
P/N: 15777
0% 100%
1
2
3
4
5
6
7
8
Clock
Timer 1 - ON
Timer 1 - OFF
Timer 2 - ON
Timer 2 - OFF
Automatic
Manual - ON
OFF
6
8:00
AM
127(:KHQ\RX¿UVWWXUQRQWKHSRZHUWRWKH6DQLWLVHULWZLOOWDNHDSSUR[LPDWHO\PLQ
for the LCD to appear on the screen.
Function Description
Selector
Switch
Position
Functions and Instructions
Set Clock 1
SET THE CURRENT TIME ON THE DIGITAL CLOCK
Select the Clock position on the selector switch to enable the time of day
to be input. A number ‘1’ will appear at the left of the screen.
D7KHGLVSOD\ZLOOÀDVKRQDQGRIIDVORQJDVWKHVHOHFWRUVZLWFK
remains at this position. Use the up and down buttons to reach the
desired times. Hold the buttons down for fast increments.
Set Timer 1 - ON 2
SET THE START TIME FOR THE FIRST RUN TIME SEQUENCE
Select the Timer 1-ON position on the selector switch. A number ‘2’ will
appear at the left of the screen.
This time factory pre-set to 6am. Proceed as per (a) in the ‘Set Clock”
instruction to change time.
To disable this timer, move up or down to 11:59PM. Press the UP button
one more time to turn OFF. NOTE: This step will also disable the time for
‘Set Timer 1 - OFF’.
Set Timer 1 - OFF 3
SET THE COMPLETION TIME OF THE FIRST RUN TIME SEQUENCE
Select the Timer 1- OFF position on the selector switch. A number ‘3’ will
appear on the left of the screen.
This time is factory pre-set to 8am. Proceed as per (a) in the ‘Set Clock’
instruction to change time.
403165_AquaReviva_I&OI.indd 12 4/7/17 9:18 am