3
Rotary Coupling Inlet
1” Male
Horizontal Outlet
1” Male
Priming Cap which covers the 1” Male Vertical Outlet
and access to the internal check valve.
Status Indicator
Lights
Prime Button
Fitting the Torrium2 directly to the Pump
The Torrium2 is tted with a rotary coupling. This
coupling allows the pump controller to be tted
simply and easily to the pump discharge.
The coupling has an oring seal. The controller
adaptor nut is able to rotate independent of the
Torrium2 and the complete pump, this allows it
to be tightened onto the pump easily. For ease
of installation a tightening tool is included with
Torrium2 to tighten the controller nut to ensure a
rm connection to your controller.
The ability to rotate the adaptor nut also means that the complete controller, once
tted to the pump, can be rotated a full 360
o
in the horizontal plane, without causing
the coupling to unscrew from the pump outlet.
DO NOT USE TEFLON TAPE OR THREAD
SEALING COMPOUNDS WHEN FITTING
TORRIUM2
DIRECTLY TO THE PUMP
To Next Page
Loading...
Need help?
General
