Davey ProMaster PM400BT

10
Low Energy Operation
Your Davey ProMaster VSD Pool Pump has variable speed settings:
Model
Lowest Speed
Highest Speed
Backwash Speed
PM200BT
Setting 1 – 1500 rpm
Setting 10 – 3600 rpm
Variable
PM400BT
Setting 1 – 1050 rpm
Setting 10 – 3100 rpm
Variable
• Speed 1 provides the lowest
speed and therefore the greatest
energy efficiency and savings.
See table below for all other dial
position speeds and functions.
Operation
Recommended Speed Setting
Pool Filtration
Speed 1 to 4
Suction pool cleaner operation
Speed 5 to 8
Backwashing your media filter
Backwash Speed
Manually cleaning your pool
Speed 9 to 10
Water Feature operation
Spa Jet operation
In-floor cleaning systems
Solar pool heating
Using your ProMaster VSD pump with a Davey Salt Water
Chlorinator
Davey salt water chlorinators require a minimum flow rate of 80 litres per
minute (lpm) through the chlorinator cell for best efficiency and cell life. Please
refer to the performance graph below as a reference for the flow in your pool
and refer to the pressure indicated by the gauge on the media or cartridge
filter.
Ensure flow rate is sufficient to cover your chlorinator cell plates completely at
all times of operation.