To Next PageTo Next Page
Need help?Do you have a question about the Davey SilensorPRO SP400BT and is the answer not in the manual?
General| Model | SP400BT |
|---|---|
| Category | Swimming Pool Pump |
| Voltage | 230 V |
| Weight | 11.5 kg |
| Inlet Size | 50mm |
| Outlet Size | 50mm |
| Variable Speed | Yes |
| Frequency | 50 Hz |
| Inlet/Outlet Size | 50mm |
| Motor Power (kW) | 1.1 kW |
| Motor Power (hp) | 1.5 hp |
Details on how to safely connect the pump to the power supply, including bonding requirements and safety precautions.
Guidance on connecting barrel unions, pipe sizes, and ensuring proper flow for optimal pump performance.
Presents the hydraulic performance curves for the SP200BT pump at various dial settings.
Details the electrical input and output specifications for the SP200BT pump across different speed settings.
Explains how the variable speed pump offers energy savings through lower operating costs and reduced emissions.
A list of essential checks to ensure safe and correct installation and operation before initial startup.
Provides recommended running times for different pool sizes to achieve optimal turnover rates.
Explains the meaning of different LED indicator light colours and patterns for operation status and warnings.
Details the pump's ability to automatically maintain flow by adjusting speed as the filter clogs.
Describes the port for external control systems, heat pumps, or service diagnostics.
Instructions for downloading and installing the Davey Pool Pump app on your smart device.
Steps for wirelessly connecting your smart device to the SilensorPRO pump via Bluetooth.
Explains the two operating modes: manual control and automated schedule-based operation via the app.
Details the RJ45 waterproof socket for external control of motor speed and other functionalities.
Illustrates the pin configurations for T-568A and T-568B RJ45 connectors used with the pump.
