Davey RainBank KRBS1 User Manual

27
Type 4 installations. External suction
pump drawing from below ground
tank.
Pump inlet should be at least (200mm)
below the lowest water level for reliable
operation.
Priming is as for Type 1 installations.
If there is a significant amount of water
required to do this it can be a good idea
to fit the highest area of the pipe with an
access plug in a T piece so that the pipe
can be filled more quickly with a bucket
when repriming.

Davey RainBank KRBS1 Specifications

General

Brand	Davey
Model	RainBank KRBS1
Category	Controller
Language	English