Need help?Do you have a question about the DAVIS 6410 and is the answer not in the manual?
Operating Environment| operating temperature range | -40° to +149°F (-40° to +65°C) |
|---|
Wind Direction| display resolution | 16 points (22.5°) on compass rose, 1° in numeric display |
|---|---|
| accuracy | ±3° |
Wind Speed| range | 2 - 200 mph, 3 - 322 kph, 2 - 173 knots, 1 - 89 m/s |
|---|---|
| accuracy | ±2 mph (3 kph, 2 kts, 1 m/s) or ± 5%, whichever is greater |
Details on attaching the wind vane to the shaft, ensuring correct orientation.
Instructions for attaching and tightening the wind cups onto the shaft.
Steps to connect the anemometer arm to the base using screws and washers.
Guidance on orienting the wind vane correctly for accurate wind direction readings.
Recommendations for optimal placement and height for accurate wind measurements.
Instructions for mounting the anemometer base onto a wooden post or flat surface.
Procedures for mounting the anemometer onto poles or pipes using U-bolts.
Best practices for securing the anemometer cable to prevent damage from weather and wind.
Addresses issues where wind cups rotate but the console shows no speed.
Solutions for wind direction indicators stuck on north or displaying dashes.
Diagnoses and fixes for wind cups that do not spin or spin too slowly.
Explains why readings might differ and how to verify them accurately.
To Next Page