DAVIS Vantage Connect Quick Start Guide

Connecting a Davis Vantage Pro 2 or Vue to Weather Underground Using a
Weatherlink IP Device
Complete installation of your weather station.
● Davis Support installation diagrams and instructions
Connect the Weatherlink IP device to the Vantage Vue or Vantage Pro 2
console.
Connect the Weatherlink IP to the Internet (plug it in to your router).
● Installation diagram for Vantage Pro 2.
● Installation diagram for Vantage Vue.
Create a free Weatherlink account at www.weatherlink.com.
Click the Add Devices button at the top right corner of the
Weatherlink website.
On the device menu, click the Install button in the
WeatherlinkIP section.
Enter your Station Name. Select the weather station Model. Identify your
Station Usage. Enter your Device ID. Enter your device Key.
● Both the Device ID (DID) and Key are found on the sticker attached to the Weatherlink IP device.
Confirm your station is communication with the Weatherlink website.
● Verify data appears on the website.
● Helpful Tip:  If no data appears, power cycle the display console after connecting the Weatherlink
IP device.

DAVIS Vantage Connect Specifications

General

Brand	DAVIS
Model	Vantage Connect
Category	Weather Station
Language	English