EasyManuals Logo

DAVIS Vantage Pro2 Console User Manual

DAVIS Vantage Pro2 Console
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
1
Chapter 1
Welcome to Vantage Pro2
TM
Welcome to your Vantage Pro2 Weather Station console. The console displays
and records your station’s weather data, provides graph and alarm functions,
and interfaces to a computer using our optional WeatherLink
®
software.
Vantage Pro2 stations are available in two basic versions: cabled and wireless.
A cabled Vantage Pro2 station transmits outside sensor data from the Inte-
grated Sensor Suite (ISS) to the console using a straight-through four-conduc-
tor cable. A wireless Vantage Pro2 station transmits outside sensor data from
the ISS to the console via a low-power radio. Wireless stations can also collect
data from optional Vantage Pro2 sensors. See “Optional Sensors” on page 2.
The Vantage Pro2 Quick Reference Guide included with your station provides
an easy to use reference for most console functions.
Console Features
Keyboard & Display
The keyboard lets you view current and historical data, set and clear alarms,
change station models, enter calibration numbers, set up and view graphs,
select sensors, and read the forecast. The keyboard consists of 12 command
keys located next to the screen display and four navigation keys located below
the command keys.
A weather variable or console command is printed on each com-
mand key. Just press a key to select the variable or function printed
on that key.
Each command key also has a secondary function which is printed
above the key on the console case. To select the secondary func-
tion, press and release 2ND (on the front of the console, upper right
corner) and then immediately press the key for that function.
Note: After pressing 2ND, the 2ND icon displays above the barometer reading on the
screen for three seconds. All secondary key functions are enabled during this time.
Keys resume normal operation after the icon disappears.
The up arrow, down arrow, left arrow, and right arrow navigation
keys are used to select command options, adjust values, and to pro-
vide additional functions when used in combination with a com-
mand key.
WIND
CHILL
2
ND
+
-
<
>

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DAVIS Vantage Pro2 Console and is the answer not in the manual?

DAVIS Vantage Pro2 Console Specifications

General IconGeneral
BrandDAVIS
ModelVantage Pro2 Console
CategoryMusic Mixer
LanguageEnglish

Related product manuals