HI/LOW CLEAR
To enter the high/low screen: Press HI/LOW . You will see the
time & date of the DAY HIGHS for the currently selected weather variable,
along with a graph showing the highs for the last 24 hours or days.
To view a different weather variable, press the key(s) for that
variable.
To scroll between highs & lows: Press HI/LOW or ( + ) or ( − ) to
scroll between:
Day Highs • Day Lows
Month Highs • Month Lows
Year Highs • Year Lows
The time and date will change as you move between the various highs
and lows. (NOTE: Not all highs and lows are available for all weather
variables. See Vantage Pro2 Console Manual for details.)
To go back or forward in time: Press ( < ) or ( > ). The time and
date will change and the corresponding dot on the graph will flash.
To exit the high/low screen: Press DONE .
To clear highs & lows: See "CLEAR."
To clear a daily, monthly, or yearly amount:
1. Select the variable you wish to clear.
2. Press 2
ND
then CLEAR , holding CLEAR down until the digits
stop flashing and zeroes appear in the field.
To clear an alarm setting:
1. Press ALARM to enter the alarm screen.
2. Select the alarm setting (see "ALARM" for detailed instructions).
3. Press 2
ND
, then CLEAR , holding CLEAR down until the digits
stop flashing and dashes appear in the fields.
4. Press DONE to return to the current weather screen.
To clear highs & lows:
Follow the directions above for clearing alarms, except press
HI/LOW to enter the high/low screen.
To clear ALL (including highs and lows, alarm settings, and daily,
monthly, and yearly amounts):
1. Press WIND , then 2
ND
, then CLEAR , holding CLEAR down for
the entire 6-second countdown until you see CLEARING NOW in the
ticker tape.
20 13
To Next Page
Loading...
