DAVIS Vantage Vue Quick Start Guide

Connecting a Davis Vantage Pro 2 or Vue to Weather Underground Using a
Weatherlink IP Device
Create a free account on the Weather Underground website:
www.wunderground.com.
Click Sensor Network on the Weather Underground home page.
Select Connect a Weather Station in the drop-down menu.
Click Add a New PWS (personal weather station).
● If there are other weather stations connected already, you may have to scroll to the bottom of the
page to locate the Add a New PWS button.
Identify your weather station’s location using the map and click Verify
Location.
Enter required information and click Submit. If done correctly, this will
generate a Weather Station ID and a Station Key. Write down both the
Station ID and Station Key from Weather Underground.
Return to the Weatherlink website and click the Share & Uploads button.

DAVIS Vantage Vue Specifications

General

Wind Speed Range	2 to 150 mph (3 to 241 km/h)
Rain Collector Resolution	0.01 in (0.2 mm)
Rain Collector Type	Tipping bucket
Update Interval	2.5 seconds
Temperature Accuracy	±1°F (±0.5°C)
Humidity Accuracy	±3%
Wireless Transmission Range	up to 1000 ft (300 m)
Humidity Range	1 to 100% RH
Wind Direction	0 to 360°
Wind Direction Accuracy	±3°
Power Supply	Solar-powered with battery backup
Console Display	LCD with backlight
Power (Console)	3 C batteries or AC adapter
Wind Speed Accuracy	±2 mph (±3 km/h) or ±5%, whichever is greater
Solar Radiation Sensor	Not included
UV Sensor	Not included
Rain Measurement Accuracy	±4% at rates up to 2 in (50 mm) per hour