Daviscomms Br808 - Getting Started; Charging the Battery; Reset Button; Powering the Device On & Off

• An audio/vibrate alert will sound periodically (if not on silent, or
if private time is not active).
The unread message notication will continue until there are no
more unread messaged
- Press < > Select reminder length value
Choose <Select> to set.
(b) Unread Page Reminder Setting
When there are unread messages, the following audio & visual
alert will occur as a reminder.
• Unread message count will appear on the status bar.
• Orange LED short ash every 5 seconds.
GENERAL SETTING GENERAL SETTING
24
23
(c) Reply, Archive & Delete a Message
- Select <OPTION> in the Message Screen to choose <REPLY>,
<ARCHIVE> or <DELETE>
(b) Reading Message
- Press <1 Unread> on the Main Screen to read message
- Press < > in the Message Screen to scroll up and down the
page
- Press < > in the Message Screen to turn to next page or
previous page
7.2 Clock
(a) Date Setting
The device will have a real time clock that can be set by the user.
In addition, if the GSM module is present, the device will attempt
to obtain the clock and time zone information from the GSM
signal.
- Select MENU>CLOCK>DATE SETTING> Set date value
- Press < > Set date format
- Press < > Select day, month or year
- Press < > Select date value
Choose <Back> to set.
(b) Time Setting
- Select MENU>CLOCK>TIME SETTING> Set hour value
- Press < > Set time format
- Press < > Select hour or minute (Select am/pm for 12 Hours)
- Press < > Select time value
Choose <Back> to set.
Three independent alarm clocks are available. Each alarm clock
can be congured to run once only or to be repeated weekly.
User can have choice of day of week for the alarm to repeat in, e.g.
dierent time for weekdays and weekends
The device can set private time where the pager will automatically
be set to silent. E.g. private time from 7pm to 6am. When private
time is active, pages will still be received but there will be no
audio/vibrate notication, and no unread reminders. New
incoming page will still display on the screen for duration of
screen timeout.
(c) Alarm Setting
- Select MENU>CLOCK>ALARM> Set hour value
- Press < > Set type of repeats
- Press < > Select hour or minute(Select am/pm for 12 Hours)
- Press < > Select time value
Choose <Back> to set.
GENERAL SETTING GENERAL SETTING
26
25
(d) Private Time Setting
Exceptions are priority pages (set at capcode level). These pages
will ignore private time and alert as per normal.
- Select MENU>CLOCK>PRIVATE TIME> Set hour value
- Press < > Set on or o
- Press < > Select hour or minute for start (Select am/pm for 12
Hours)
- Press < > Select time value
-- Press < > Select hour or minute for stop (Select am/pm for
12 Hours)
Choose <Back> to set.
GENERAL SETTING
27
The device has 4 audio alert settings. They are:
• Audio + vibration
• Audio only
• Vibrate only
• Silent
(a) Alert Mode Setting
- Press < > Set audio, vibrate, silent mode
Choose <Select> to set.
7.3 Alerts
If the pager is set to silent of vibrate only, it will not aect the
alarm clock audio alert (if set).
GENERAL SETTING
28
(a) Brightness Control
(c) Auto Lock
- Select MENU>DEVICE SETTING>BRIGHTNESS LEVEL> Set
brightness level for screen
Press the Up/Down Key < > to adjust the brightness.
(a) Volume level
- Select MENU>DEVICE SETTING>VOLUME LEVEL> Set the
volume level for the device.
Press the Up/Down Key < > to adjust the Volume.
- Select MENU>DEVICE SETTING>AUTO LOCK> Set timing for
auto lock
- Press < > Set time for keypad lock
Choose <Select> to set the auto lock.
7.4 Device Setting