Daviscomms Br808 - General Setting; Message

8 Br808P - POCSAG Alphanumeric Pager
The device will only receive page from the pre-dened CAPCODES
and recognize the following message types
• Page messages – a page intended for a single pager or group
of pagers
• News message – broadcast of news and meant for all pagers
8.1 Additional Device feature
• European languages prompt (up to 10)
• Sub - address alert tone (only for alert 1)
• Sequential lock out (30s,1m,2m,4m)
• Duplicate Detection
• Out-of- range indicator
• Keypad Program
• AES data decryption
8.2 Message
1 Unread 1 Unread
Main
EAM !
(Emergencncy Action Message)!
Defcon 2
To report back to camp
Pop out box for
new message
1 Unread message
(b) Reply, Archive & Delete a Message
- Select <OPTION> in the Message Screen to choose <REPLY>,
<ARCHIVE> or <DELETE>
Note: Canned message reply feature is not available on Br808P.
Page Message Inbox Icons
Message List
unread
pager message
read
pager message
Pe
Pe
Note: Pe indicate which capcode it received.
The language can be selected at the device. In addition the
European character mapping for the paging will also be activated
according to the language setting.
8.3 Language Setting
(a) Receiving Page Message
The device can switch to silent very quickly by holding the down
arrow key. All previous audio and vibrate will be turned o. If the
device is already in silent mode, then the quick silent toggle will
not make any dierence. Holding the up arrow key will revert
back to the previous audio/vibrate mode.
- In Audio + Vibrate, Press and hold the Down Key to switch
to Vibrate Only in Main Screen.
- In Audio Only, Press and hold the Down Key to switch to
Silent mode in Main Screen.
- Press and hold the Up Key to switch to Normal mode
or in Main Screen.
7.5 Shortcut Keys
Silent Mode Shortcut
GENERAL SETTING
29
BR808P
30
31
BR808P BR808P
32
Three message folders for BR808P.
• Page Messages - all page messages will go into this folder
• Archive Messages - any message from Page & News folder can
be (manually) archive into this folder
• News Messages - all news page messages will go into this folder
33
BR808P
(c) Archive the Page Message
User can archive a message and it will be moved to the Archive
message folder.
- Select <OPTION> in the Message Archive Screen to choose
<DELETE>
- Select <OPTION> in the Message Screen to choose
<ARCHIVE>
BR808P
34
If the Archive message folder is full, it will display ‘archive folder
full’. The user will have to remove unwanted page messages from
the archive folder to make way for new ones
(d) News Message
“News” are page messages that are broadcast periodically and
meant for all pagers. Examples of “news” messages are weather,
trac, etc.
When this type of message is received, it will go into the news
message folder. User can opt to turn on alert or be silent for such
message arrives. The alert options are short beeps. There will be
no LED or vibration alert. In addition, there will be no reminder
alert for unread messages.
If the message folder is full, the oldest message will be removed
to make way for new messages.
(e) News Filter
News can ltered out to avoid lling the news folder with
unwanted news. Filtered news will not be received by the device.
When a news is turned on, any new news will then be accepted
and start going into the news folder.
(f) Message Setting
- Select message setting for <DELETE ALL PAGE MESSAGE>, &
<DELETE ALL NEWS MESSAGES>
Note: To prevent accidental delete of message that need to be
kept, the user should archive it to the archive folder.