Dawlance DW-133G - Operating Instructions; Setting the Clock; Microwave Cooking Procedure

11
When the microwave oven is electried, the LED will display "0:00", buzzer will ring once.
1) Press " Clock/Kitchen Timer " once to select clock function, the hour gures will ash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " Stop/Clear ", the oven will go
back to the previous status automatically.
Note: The step quantities for the adjustment time of the coding switch are as follows:
OPERATING INSTRUCTIONS
1. CLOCK SETTING
2) Turn " " to adjust the hour gures, the input time should be within 0--23.
Press " Microwave " the LED will display "P100". Press " Microwave " for times
or turn " " to choose the power you want, and "P100", "P80", "P50", "P30" or
"P10" will display for each added press. Then press " Start/+30Sec./Conrm " to
conrm, and turn " " to set cooking time from 0:05 to 95:00. Press
" Start/+30Sec./Conrm " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven using the following steps.
2. MICROWAVE COOKING
4) Turn " " to adjust the minute gures, the input time should be within 0--59.
3) Press " Clock/Kitchen Timer ", the minute gures will ash.
1) Press " Microwave " once, the screen displays "P100".
5) Press " Clock/Kitchen Timer " to nish clock setting. ":" will ash, and the time will light.
2) Press " Microwave " once again or turn " " to choose 80% microwave power.
3) Press " Start/+30Sec./Conrm " to conrm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " Start/+30Sec./Conrm " to start cooking .
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes