EasyManuals Logo

Dawlance DWT 1166 X ADS+ User Manual

Dawlance DWT 1166 X ADS+
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
7 8
Water inlet installation
Before using
Connect the inlet hose connector with the inlet hose
Check the connection between the inlet hose
connector and the tap
Inlet valve connector
Inlet hose nut
Water absorption cushion
Lock lever
Inlet hose connector
Slider
1. Push down the slider and insert the inlet hose into the connector.
2. Hang the lock lever to the inlet hose connector and release
the slider till a click sound is heard.
1. Swing the inlet hose gently to conrm if it is fastened.
2. After installation, open the tap and check if it leaks.
3. Do not bend the inlet hose with overstrain.
4. Before each usage, check the connection between
the inlet hose connector and the tap. Also, make sure that
the inlet hose is installed properly. Conrm that they are rmly
tted to prevent dropping from improper installation position.
Slider
Lock lever
Connect the inlet hose with the washing machine
1. Do not take off the water absorption cushion. Please
check if the cushion is dropped or damaged before
each use. If it is, contact the seller immediately.
2. Put the inlet hose nut on the inlet valve connector.
3. Fasten the inlet hose nut and swing it gently to make
sure if it is suitable.
1. Close the tap.
2. Press the locking lever, push down the slider, and pull off the
inlet hose. If the machine is used frequently, the connector
of the inlet hose can be kept on the tap to prevent damage to
the xing screw.
Dismantle the inlet hose
Cautions: When installing the washing machine, please use the new hose along with the washing
machine. Old hose cannot be reused.
Preparation before
operation
Operation
Preparation before washing
1. Connect the inlet hose and open the tap.
2. This appliance must be earthed. Conrm
the socket is earthed reliably and insert the
power plug. The earth terminal should not
link to the gas pipeline, tap pipeline etc.
3. Put down the drainpipe.
Before washing the laundry, please pay attention to the following:
Make sure to be aware
if there are any special
requirements for the
laundry.
Before washing, empty
all the pockets of small
objects, which may
have been left inside
(coins, keys, screws etc.)
as these could damage
the drain pump.
Knot the long band,
fasten the buttons
and close the zippers.
Do not overload the
machine. Load the
laundry loosely
alternating large
items with small ones.
Sort the laundry
according to the type
of fabric, color-fastness
and how dirty it is. Put
thin laundry, woolens
and such prone to wear
and tear laundry into a
washing bag.
A. Make sure the laundry is washable.
B. It is essential to wash new colored items separately when washing for the rst time. White items
should not be washed with colored items.
C. Please immerge the non-absorbable laundry by hand.
D. Some stains such as fruit, wine, grass, rust etc. are difcult to remove and should be treated
before washing with specic products, which can be found in most household shops. In some
cases, it may help soak the stain before washing with a special pre-soak product or biological
detergent.
E. Overturn the nap fabric and long oss laundry before putting them
into the machine.
F. Do not put the laundry polluted by chemicals into the machine directly.
G. Very small items (handkerchiefs, ribbons, socks etc.) should be washed in a washing bag or a pillow case.
Warning: The temperature of the water should be less than 50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dawlance DWT 1166 X ADS+ and is the answer not in the manual?

Dawlance DWT 1166 X ADS+ Specifications

General IconGeneral
BrandDawlance
ModelDWT 1166 X ADS+
CategoryWasher
LanguageEnglish

Related product manuals