11
Riding in Cold Weather
Your e-bike is designed to operate year-round. However, in very cold condions or when
there is a lot of snow or slush on the ground, it is possible for the motor in the e-bike
to get wet or for the brakes to funcon less eecvely, just as it can happen in wet
weather. Below 10 degrees Celsius, the baery will not work as well as it would in warmer
temperatures. While Lithium-Ion baeries perform beer than Lead-Acid baeries in
temperature extremes, both will experience reduced performance in cold temperatures.
Also, riding the e-bike in cold temperatures may require you to replace the baery sooner
rather than later.
Maximum Load
Do not exceed the maximum load capabilies of your e-bike. You can nd the exact loading
capacity listed in the technical specicaons in this guide.
If you exceed the maximum load, the performance of the bike will suer.
Exceeding the maximum load of your e-bike could cause damage to the shocks, to the
mechanism and, ulmately, even to the frame. It could also cause your motor to work too
aggressively, and may cause it to burn out.
Disconnecting the Circuit Breaker
When the circuit breaker is disconnected, all power from the baery to the e-bike is
blocked. This is useful if you are going to store your e-bike or if it is damaged and you wish
to bring it to be serviced.
Note: The circuit breaker must be on for the alarm system to work. Do not leave the
circuit breaker o in an unsafe locaon if you are worried about the.
Long-Term Storage of your E-bike
If you are storing your bike for a long period, disconnect the circuit breaker. This is a safer
way to store the electric bicycle, as it prevents accidental acvaon of the e-bike and
makes it impossible to acvate it even with the key.
Please see the secon tled “The Baery” for instrucons on baery maintenance while
your e-bike is being stored.
To Next Page
Loading...
Need help?
General