25
Technical Data
This secon provides you with the technical specicaons for your e-bike.
The Motor and Wheel Assembly
The EM4 has a 500 Wa magnec DC brushless motor on the rear wheel hub. This type
of motor has excellent low-end torque and high eciency when working within its range.
Note that while the motor is very quiet, it does produce some noise. Also aached to the
rear hub are speed reducon gear and the speed free clutch.
The Freewheel
The wheels have freewheels, so the e-bike’s drive train is not xedly geared. This means
that when coasng or traveling downhill, you can turn o the engine and your e-bike will
connue to move without slowing. This feature will allow you to achieve faster speeds
when coasng, moving downhill or moving with the wind. It will also allow you to conserve
electrical power, because you will be able to let to the motor rest while moving.
The Controller
Daymak pioneered the development of intelligent component control in e-bikes. The
Daymak Drive technology developed by Daymak is the brain of your e-bike. It allows your
e-bike to achieve faster acceleraon, to climb steeper hills, and to save energy.
The electronic controller is located under the seat assembly. This controller eciently
regulates the speed and electronic funcons of the bicycle. It allows for stepless speed
adjustment, shuts o the motor when the brakes are acvated, has low voltage protecon
and has fuses to prevent excess current from damaging the e-bike’s systems. This can all
be regulated by Bluetooth app.
To Next Page
Loading...
Need help?
General