Do you have a question about the DaytonAudio HTA20 and is the answer not in the manual?
maximum power output (peak) | 45W x 2 @ 4 Ohm |
---|---|
RMS power output | 15W RMS x 2 @ 4 Ohm |
total gain | 28 dB |
total harmonic distortion | <0.5% @ Maximum Rated Output |
frequency response | 20 Hz – 20, 000 Hz (1 db) |
input sensitivity | 315 mV |
channel separation | 53 dB |
minimum speaker impedance | 4 Ohm |
signal to noise ratio | 75 dB |
PC-USB | up to 192 kHz 32 Bit |
---|---|
Bluetooth version | 5.0 |
power requirement | 100V-240V, 60/50 Hz |
---|---|
standby power consumption | 8W |
preamplifier tubes | 6F1 x 2 |
amplification | Class A/B |
dimensions (W, H, D) | 9.2 x 6.2 x 4.2 in. (234 x 157 x 107 mm) |
weight | 2.55 lbs. / 1.15 kg |
Essential safety guidelines to prevent electric shock, fire hazards, and ensure proper ventilation.
Details on FCC rules compliance, interference, and user guidance for radio frequency emissions.
Highlights include compact footprint, USB-DAC, Bluetooth, headphone amp, and subwoofer output.
Lists items included with the HTA20 amplifier, such as the unit, power cable, and manual.
Details and labels for the amplifier's top panel controls, including source selector and volume knob.
Diagram and explanation of rear panel inputs, outputs, Bluetooth antenna, and power switch.
Identification of the front panel headphone output jack.
Instructions for connecting speakers using banana plug cables or bare wire, ensuring correct polarity.
Guidance on using the S.W. OUT for a mono summed signal to a powered subwoofer.
Instructions for connecting headphones to the front panel jack and volume control advice.
Overview of connecting CD players, PCs, and other devices via analog and digital inputs.
Steps for pairing and streaming audio wirelessly from Bluetooth-enabled devices.
Detailed performance metrics including power output, frequency response, and digital section capabilities.
Details on the 5-year limited warranty, service, and owner responsibilities.