DBI SALA Exofit - User Manual

This manual is intended to meet
the Manufacturer’s Instructions as
required by ANSI Z359 and should
be used as part of an employee
training program as required by
OSHA.
© Copyright 2008, DB Industries, Inc.
Instructions for the
following series products:
ExoFit Full Body Harnesses
(See back pages for specic
model numbers.)

Summary

APPLICATIONS AND LIMITATIONS

PURPOSE AND TYPES OF APPLICATIONS

SPECIFIC APPLICATION TYPES

Covers personal fall arrest, work positioning, ladder climbing, rescue, controlled descent, and restraint.

APPLICATION LIMITATIONS AND HAZARDS

Considers limitations like capacity, free fall, fall clearance, swing falls, and environmental hazards.

SYSTEM REQUIREMENTS AND CONNECTIONS

COMPONENT AND CONNECTOR COMPATIBILITY

MAKING SECURE CONNECTIONS

Provides guidelines on making secure connections to prevent roll-out and ensure safety.

ANCHORAGE STRENGTH REQUIREMENTS

DONNING AND USE PROCEDURES

PLANNING SYSTEM USE AND SAFETY

DONNING AND FITTING VEST STYLE HARNESS

Step-by-step instructions for donning and fitting the ExoFit Vest Style Full Body Harness.

DONNING AND FITTING CROSS-OVER STYLE HARNESS

Step-by-step instructions for donning and fitting the ExoFit Cross-Over Style Full Body Harness.

USING FALL ARREST D-RINGS

INSPECTION AND MAINTENANCE

INSPECTION FREQUENCY AND STEPS

Defines inspection frequency (before each use, annually) and detailed inspection steps.

LABELING AND INSPECTION LOG

HARNESS LABEL DESCRIPTIONS

INSPECTION AND MAINTENANCE LOG

DBI SALA Exofit Specifications