1. GENERAL SETUP PAGE
There are six items in the GENERAL SETUP PAGE. They are TV
DISPLAY/ANGLE MARK/OSD/LANGUAGE/
CAPTIONS/SCREEN/SAVER and LAST MEMORY.
1.1 TV DISPLAY 4:3 PANSCAN
If the unit is connected to a conventional TV set, a wide-screen
image will be displayed on the screen in its native aspect ratio with
some part on the left and right cut off.
4:3 LETTERBOX
If the unit is connected to a conventional TV set, a wide-screen
image will be displayed in its native aspect ratio with black borders
on the top and on the bottom.
16:9 WIDE:
Select this option if the unit is connected to a wide-screen TV set. A
wide-screen image will be displayed in its native aspect ratio, while a
4:3 image will be stretched out horizontally to fit the screen.
1.2 CAMERA ANGLES
When this is set to ON, a disc encoded with multiple camera angles
will display an icon on the screen. View different camera angles by
pressing [ANGLE] on the remote control. Set this item to OFF to
disable this function.
NOTE: This function only works if the DVD is encoded with multiple
camera angles.
1.3 OSD (on-screen display) language
Set the on-screen display language in this item.
- 16 -
@dbpower.co support@dbpower.co
To Next Page
Loading...