5
2. SPECIFICATIONS
PORTS
One synchronous serial port:
RS-232 (per EIA/TIA 561 RJ 45 connector)
Speeds to 230 Kbps
RS-530 or V.35 balanced interface option
Speeds to 2.048 Mbps
One 10/100BaseT Ethernet port
One asynchronous 9600 baud RS-232 port for setup
HDLC COMPATIBILITY
Accepts/Sends any HDLC frame up to 1500 bytes long
Data Encoded via NRZ or NRZI
Standard CRC-CCITT as used in HDLC or Sync PPP
Internal or External clocks
Including but not limited to: HDLC, Sync PPP, Frame relay
PROTOCOL FEATURES
IP, DHCP (Client), UDP, ICMP, HTTP, TCP/IP
Authentication: internal name/password database, or up to two external, customer-supplied
RADIUS servers
Encryption: 128-bit AES or NONE
Once connection is established, tunnels use UDP to deliver packets
Web browser, telnet, or serial port configuration and management
Default IP address: 192.168.0.96
INDICATORS
Front - Power, Status, Valid received sync data, port activity
Rear – LAN connection, LAN activity
CONTROLS
DIP switch:
Setup (initial setup using serial terminal)
Reset
PHYSICAL/ELECTRICAL
Power: 6VDC external supply, 1330 ma standard
12, 24, 48, 125 VDC and 240 VAC options are available
Supplied with 120 VAC external power supply
5 ¼”x 5 ½”x 1 ¾”
One pound
ENVIRONMENTAL
Operational Temperature: −40° to +70° C
Storage Temperature: −50° to +75° C
Humidity: < 95% Non-condensing
To Next Page
Loading...