To Next PageTo Next Page
Need help?Do you have a question about the DCB EST-9600 and is the answer not in the manual?
Details the serial and Ethernet port configurations and capabilities.
Specifies compatibility with HDLC frames, encoding, and clock sources.
Outlines supported protocols, authentication methods, and encryption.
Describes the initial setup process using the SETUP port and serial cable.
Discusses link security (encryption) and management security (Telnet, web browser).
Guides on connecting the synchronous and Ethernet ports to external equipment.
Guides setting tunnel values, encryption, and mode for the EST-9600.
Details configuring primary host values, including IP address and passphrase.
Explains how to set IP address, subnet mask, and default gateway for LAN configuration.
Details setting clock source and interface type for HDLC ports.
Guides setting sync mode clock source, rate, and encoding for HDLC.
Instructions for connecting the PC to the EST-9600 SETUP port.
Details PC terminal emulation software settings for initial setup.
Procedure for interacting with the EST-9600 setup program via the serial port.
Configuration options for username, password, ping, Telnet, and web server settings.
Configuration settings for HDLC tunnel, including passphrase, encryption, and mode.
Parameters for configuring the Ethernet interface, such as IP address and DHCP.
Sets the IP address, subnet mask, and default gateway for the Ethernet interface.
Outlines a rational plan for troubleshooting, including fact gathering and testing.
General