21
INSTALLATION
Gas hook-up
1 Place the tank restraint in the island and
locate within the recommended area.
2 Once located, secure to the bottom of the
island using all eight hole locations provided
on the restraint. Wood screws can be used
for wooden floors or 1/4 inch diameter
anchor screws or bolts may be used if the
floor is concrete or masonry.
4 Attach the regulator hose assembly and
operate the grill normally as described in the
manual.
3 When secure, place the LP cylinder into the
tank restraint making sure to seat the tank
all the way down, securely affixing the tank
in the restraint.
To Next Page
Loading...
