DCS DRH-48N - Clearance Specifications

11
INSTALLATION
CLEARANCE SPECIFICATIONS
45
0
INSTALLATION
MINIMUM CLEARANCES TO NON-COMBUSTIBLE MATERIAL.
Utilize 2
bolts (min)
per bracket.
SIDE VIEW
Four Bolts
Per Bracket
(installer supplied)
FLOOR
96"
min.
Sur face
Non Combustible
Gas Shut- off
Valve
Drip Leg
with 1/8” NPT
plugged test
gage connection
Gas Pipe
(installer supplied)
(installer supplied)
45
0
max.
18"
min.
1/2" Conduit
(installer supplied)
Note: Stainless steel hardware is highly
recommended. Bolts in the wall
should be secured to the wall
studs/structure. Weight of the
heater is 50 lbs.