Need help?Do you have a question about the DCS RDS-484GG and is the answer not in the manual?
Key information regarding UL standards, vent hoods, and building codes for safe installation.
Specifies the order of component installation, including vent hood, backguard, and range.
Safety advice for moving and handling the appliance, including warnings about doors.
Guidance on removing oven doors and kick panel for easier movement.
Instructions for positioning the range and ensuring it is level.
How to adjust griddle and grill levels using leveling screws.
Steps for installing the anti-tip bracket for safety, including mounting on different surfaces.
Specifies required clearances for standard/island installations and cabinet preparation.
Shows required locations for gas and electrical supply connections.
Detailed table of dimensions for various installation scenarios and models.
Details electrical supply requirements, voltage, amperage, and receptacle type.
Details natural gas and LP gas connection types and pressure requirements.
Steps for connecting the gas supply line, including shut-off valve placement.
Safety notes on pressure testing gas systems and using approved flex lines.
Guidance on checking and adjusting burner flames and igniter function.
Recommendations for cleaning stainless steel surfaces without causing damage.
Electrical diagrams and schematics for RDS-48 models.
Electrical diagrams and schematics for RDS-36 models.
Electrical diagrams and schematics for RDS-485 models.
Electrical diagrams and schematics for RDS-305 models.
Outlines what DCS covers for repairs and parts during the warranty period.
Lists situations and damages that are not covered by the DCS warranty.
To Next Page
General
