11
US
CA
Positioning the shelves
Shelf positions are numbered from the bottom.
Position the shelves you will need before turning the oven on.
For advice on which shelf position to use, see sections ‘Oven modes’, ‘Oven cooking guidelines’,
and ‘Baking charts’.
Main oven shelves
The wire shelves and slides are built
together as one unit.
When positioned correctly, the slides will
prevent the wire shelves from tilting when
pulled forward.
Beware: these shelves are heavy.
Important!
If you have an RDU/RDV or RGUC/RGVC model,
never leave these shelves in the oven during a
CLEAN cycle. If you do, they will no longer slide
smoothly.
Secondary oven shelves
These shelves have safety stops to keep
them from sliding out of the oven when
pulled forward.
The front stops prevent the shelves from
hitting against the back of the oven.
Oven use
1
2
3
4
5
1
2
3
4
5*
Slide
* not available in RGUC/RGVC models
Wire shelf
SECONDARY OVEN
(48” models only)
MAIN OVEN
Front stop
Safety stop
To Next Page
Loading...
