1
Make sure the guard rail is at the back,
facing up.
3
Tilt the front up slightly to help the safety
stops clear the side rack wires.
4
Lower the shelf back onto the side rack
wires and slide all the way into the oven.
To remove the shelves
1
Wait for the oven to cool down completely.
2
Pull the shelf forward about ¾ of the way.
3
Tilt the front up slightly to help the safety stops clear the side rack wires.
4
Remove the shelf.
2
Position the shelf: it should rest on the side
rack wires, as shown.
Guard rail
Side rack wire
Safety stop
To Next Page
Loading...
