of
INDUSTRIAL PUMPS
www.debem.com
Translation of Original Instructions BOXER - rev. 2021
CHAPTER 1 GUIDANCE DOCUMENTS 4 - 12
1.1 DECLARATION OF CONFORMITY 5
1.2 LIST OF RESIDUAL RISKS 6
1.3 INTRODUCTION 7 - 10
1.4 FOREWORD 11
1.5 GENERAL NOTES ON DELIVERY 11
1.6 WARRANTY 12
CHAPTER 2 INTRODUCTORY INFORMATION 13 - 22
2.1 PUMP IDENTIFICATION 14
2.2 PUMP CONFIGURATION CODE 15
2.3 ATEX MARKING AND DEFINITION 16 - 17
2.4 IECEX MARKING AND DEFINITION 18
2.5 PUMP DESCRIPTION 19
2.6 PROPOSED USE AND IMPROPER USES 19 - 20
2.7 TECHNICAL FEATURES 21 - 22
CHAPTER 3 WARNINGS AND REQUIREMENTS 23 - 27
3.1 SAFETY RULES 24 - 27
CHAPTER 4 TRANSPORT AND INSTALLATION 28 - 37
4.1 STORAGE AND PRESERVATION 29
4.2 TRANSPORT AND HANDLING 30
4.3 POSITIONING AND INSTALLATION 31 - 34
4.4 PNEUMATIC CONNECTION 35 - 37
4.5 CHECKS PRIOR TO COMMISSIONING 37
CHAPTER 5 COMMISSIONING AND STOP 38 - 42
5.1 COMMISSIONING AND OPERATION 39 - 40
5.2 NORMAL STOP OF THE PUMP 41
5.3 EMERGENCY STOP OF THE PUMP 42
CHAPTER 6 ROUTINE MAINTENANCE 43 - 57
6.1 SCHEDULED MAINTENANCE TABLE 44
6.2 EXTERNAL CLEANING AND TIGHTNESS CHECK 45 - 46
6.3 TIGHTNESS CHECK 47 - 48
6.4 PRODUCT CIRCUIT MAINTENANCE 49 - 53
6.5 AIR CIRCUIT MAINTENANCE 54 - 57
CHAPTER 7 TROUBLESHOOTING 58 - 59
CHAPTER 8 DECOMMISSIONING AND DISPOSAL 60 - 67
8.1 DECOMMISSIONING AND WASHING FORM 61 - 63
8.2 DISPOSAL 64
NOTES 65 - 67
INDEX
To Next Page
Loading...
