To Next PageTo Next Page
Need help?Do you have a question about the Debem BOXER Series and is the answer not in the manual?
General| Power Source | Compressed Air |
|---|---|
| Motor Power | N/A (Pneumatic) |
| Type | Diaphragm Pump |
| Pump Body Materials | Aluminium |
| Diaphragm Materials | PTFE, NBR, EPDM |
| Fluid Inlet/Outlet Size | 1/2", 3/4", 1", 1-1/2", 2", 3" (depending on model) |
Statement of CE/UE conformity, listing applicable directives and standards for the pump.
Identification and description of potential hazards remaining after safety measures are implemented.
Breakdown of the pump model code, explaining each component and material designation.
Explanation of ATEX markings, equipment groups, temperature classes, and protection levels.
Explanation of IECEx markings, gas/powder groups, temperature classes, and protection levels.
Comprehensive technical data, including performance, dimensions, materials, and weights for various pump models.
Critical safety rules and precautions that must be followed during all stages of pump use.
Essential checks to verify correct installation and readiness before initial pump operation.
Step-by-step guide for starting up the pump and beginning its operation.
Procedures for safely stopping the pump during normal operational use.
Instructions for executing an emergency stop to mitigate immediate hazards.
A table outlining the recommended periodic maintenance tasks and their intervals.
