DEC RUNNER User Manual

RUNNER 14
4/1 – SET-UP
The machine is packed for shipment, placed on a pallet and fixed to it by means of two wooden
wedges to block the wheels and a transverse strap, to the floor. The machine is then covered with
in a heat-shrink plastic bag. On receiving the package, cut the bag, remove the wooden wedges
and the strap, then lower the machine from the pallet using a special ramp.
The machine is shipped with the floor drier dismantled and the batteries mounted, to limit the size of
the package.
If ordered without batteries, insert them by positioning as shown below; then connect the cables
supplied, taking great care to connect the poles.
Follow the layout shown here.
ATTENTION: Incorrect connection can damage the electrical system
irreparably!
+
+
-
-
+
-
+
-

4
-
P REPAR I N G
FOR W O R K
USE AND MAINTENANCE
4 6V 450 Ah
batteries
(320 Ah opt.)

DEC RUNNER Specifications

General

Brand	DEC
Model	RUNNER
Category	Scrubber
Language	English