RUNNER 26
7/2 – LUBRICANTS/OILS TABLE
Traction unit gear reducer
7/3 – TIGHTENING TORQUES TABLE
( Q.ty x Diam. x class )
( Nm )
Unit to Chassis
to Traction unit
7/4 – CLEANING
The machine must be cleaned using water and detergents that are not aggressive; do not
use solvents or hydrocarbons which can damage the plastic parts such as the tank and
cowling, and avoid using steam jets as this can damage the plastic parts. Do not spray water
on motors or on electrical parts. Do not use metal brushes.
To Next Page
Loading...