Need help?Do you have a question about the DECKEL FP1 and is the answer not in the manual?
General| Type | Milling Machine |
|---|---|
| Manufacturer | DECKEL |
| Model | FP1 |
| X-Axis Travel | 300 mm |
| Z-Axis Travel | 340 mm |
| Spindle Speed Range | 40 - 2000 RPM |
| Spindle Taper | ISO 40 |
Describes procedures for moving machine slides past reference marks.
Details how to align the machine and store reference points in manual mode.
Explains how to switch on the unit and move past reference marks.
Explains how to move machine slides to preselected positions.
Details steps before starting a positioning operation, including REF key usage.
Explains how to use the digital readout unit for tool radius compensation.
Outlines how the unit indicates faults and how to cancel diagnosis readouts.
Lists technical specifications like number of digits and resolution.
Identifies and explains the function of various controls on the unit.
Details the procedure for switching on the machine and digital readout unit.
To Next Page