Deckma OMD Series - O-Ring Inspection and Condition Check

DECKMA
HAMBURG
Page: 11
Appendix
V.
1.6 Checking the O-Rings
Step 1.
Figure 14
Figure 15
1. Check the condition of the three
O-Rings as shown in the figures. If
damaged, replace.
2. O-Rings B + C may or may not be
present, depending on flow rate
adjustment.
3. O-Ring A is always present.
A=11.5X3 mm
B= 8.5X2 mm
C= 4.5X2 mm
Figure 16
A
B
C
A
B