To Next PageTo Next Page
Need help?Do you have a question about the Deckma OMD-24 EV and is the answer not in the manual?
General| Power supply | 24 V DC |
|---|---|
| Protection class | IP65 |
| Output Current | 4 - 20 mA |
| Alarm set points | Adjustable |
| Ambient temperature | +55°C |
| Operating Temperature | +55°C |
Factory inspection and normal operation of monitors.
Recommendation and procedure for ordering and using service exchange units.
Two independent oil alarm circuits with adjustable set points and delay, plus alarm LEDs and relays.
Detailed technical specifications for the OMD-24 model.
Detailed technical specifications for the OMD-24 EV model.
Detailed technical specifications for the OMD-24 EVA model.
Detailed technical specifications for the OMD-24 A model.
Mounting dimensions and installation guidelines for OMD-24.
Mounting dimensions and installation guidelines for OMD-24 EV.
Installation steps for OMD-24 EVA with Auto Clean System.
Mounting dimensions for OMD-24 A assembly.
Checks for power supply, grounding, piping, and connections during commissioning.
Important guidelines for maintaining the OMD-24 Series units.
Troubleshooting guide for common faults in the Automatic Cell Cleaning Unit.
Information on electronic sealing and access for calibration.
Procedure for checking zero point, drift, and repeatability.
Self-test routine to check alarm contacts and instrument drift.
List of recommended spare parts for the OMD-24 Series.
