HOW TO
USE
5
ASSEMBLING THE PASTA MAKER
1. Ensure the Base (9) of the Pasta Maker is on a flat, dry surface, and not plugged
into your power supply. Find your Mixing Chamber (3) and fix it in position on the
top of your Base (9). Insert Mixing Paddle (2) onto the motor shaft, or the small
insert hole at the top of the Mixing Chamber (3). Once the Mixing Paddle (2) is
inserted into the Mixing Chamber (3), gently rotate the Mixing Paddle (2) to fix it
in place.
2. Insert the Extrusion Pipe (4) into the front opening of the Mixing Chamber (3).
3. Insert the Spiral Rod (5) into the front opening of the Extrusion Pipe (4). Fix
into place.
To Next Page
Loading...