EasyManua.ls Logo

DeDietrich EMC-M 24 - User Manual

DeDietrich EMC-M 24
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
Wall-hung gas condensing boilers
EMC-M 24
EMC-M 24/28 MI
EMC-M 30/35 MI
EMC-M 34/39 MI
Installation and
Service Manual
7601972-03

Table of Contents

Questions and Answers

  • J
    John TurnerAug 18, 2025
    What to do if my DeDietrich EMC-M 24 Boiler shows Error code 3?
    • J
      John OrtizAug 18, 2025
      If your DeDietrich Boiler displays error code 3, which is signaled by 3 red flashes, it indicates an ignition fault. To resolve this, verify that the gas valve is fully opened.
  • K
    Kristen SnyderAug 20, 2025
    Why does my DeDietrich EMC-M 24 show Error code 2?
    • N
      Nathaniel ScottAug 21, 2025
      Error code 2 on your DeDietrich Boiler, indicated by 2 red flashes, means the maximum temperature of the heat exchanger or control unit has been exceeded. You should check the cleanliness of the heat exchanger.
  • J
    Jennifer NguyenAug 23, 2025
    What to do if DeDietrich Boiler displays error e[02?
    • A
      Arthur CaldwellAug 23, 2025
      If your DeDietrich Boiler shows the error code e[02, this indicates that a sensor is either not connected or badly connected. You should check that the sensors are operating correctly.
  • K
    Katrina GarciaAug 26, 2025
    What does Error code 1 mean on a DeDietrich EMC-M 24 Boiler?
    • S
      Sara CastilloAug 26, 2025
      Error code 1 on your DeDietrich Boiler, signaled by 1 red flash, indicates a sensor fault, temperature fault, or flow fault. Check that the sensors are operating correctly.
  • S
    Shelby FosterAug 28, 2025
    How to fix e[12 error on DeDietrich EMC-M 24 Boiler?
    • T
      Theresa AllenAug 28, 2025
      The e[12 error code on your DeDietrich Boiler indicates no circulation. Check the cleanliness of the heat exchanger.
  • B
    Brenda KennedyAug 30, 2025
    What causes Error code 5 on DeDietrich EMC-M 24 Boiler?
    • A
      Amanda MarksAug 31, 2025
      Error code 5 on your DeDietrich Boiler, which is indicated by 5 red flashes, signifies a parameter error. To fix this, check the wiring.
  • S
    Shelby CoxSep 2, 2025
    What does e[00 mean on DeDietrich EMC-M 24 Boiler?
    • A
      Allison WeissSep 2, 2025
      The error code e[00 on your DeDietrich Boiler means there is a bad connection. Check the wiring.
  • S
    Steven DonovanSep 4, 2025
    How to troubleshoot e[01 error on DeDietrich EMC-M 24?
    • E
      Elizabeth WalkerSep 4, 2025
      The error code e[01 on your DeDietrich Boiler indicates a bad connection. Check the wiring.
  • P
    Patricia FordSep 7, 2025
    What to do for Error code 4 on DeDietrich EMC-M 24?
    • K
      Katie BruceSep 7, 2025
      If your DeDietrich Boiler is showing error code 4, which is indicated by 4 red flashes, you should check for adequate draw on the chimney connection.
  • M
    Mary SanchezSep 9, 2025
    How to resolve Shutdown code 1 on DeDietrich EMC-M 24?
    • S
      Sarah RamirezSep 9, 2025
      If your DeDietrich Boiler displays shutdown code 1, which is signaled by 1 green flash, check the water circulation, including the direction, pump, and valves.

DeDietrich EMC-M 24 Specifications

General IconGeneral
BrandDeDietrich
ModelEMC-M 24
CategoryBoiler
LanguageEnglish

Related product manuals