5. Press the
key to go back to the main display.
5.4
Changing the domestic hot water temperature
The temperature of the domestic hot water can be changed as needed.
Important
The domestic hot water temperature can only be adjusted in this
way if a domestic hot water sensor is installed.
1. Press the key to select the domestic hot water temperature.
2. Press the or key for the required temperature.
3. Press the key to confirm the value.
5.5
Setting the Timer Program
If a timed thermostat is not being used, the timer program for the
appliance can be used. The Timer Program can be used to lower the
heating temperature during the night or an absence during the day. A start
and end time for the lower temperature can be set in the Timer Program.
Important
Activate the timer program using the parameter:
The timer program can be set for each zone (heating, domestic
hot water or cooling).
1. Navigate to the Counter menu.
2. Press the key to open the menu.
3. Keep pressing the key until the required zone is displayed.
If there is only a direct heating group, the only option that appears is
CIRCA (circuit A).
4. Press the key to confirm the selection.
The icons dedicated to the days of the week all flash at the same
time: .
Fig.39
Step 5
Fig.40 Step 1
Fig.41 Step 2
Fig.42 Step 3
Fig.43 Step 2
Fig.44 Step 3
Fig.45 Step 4
5 User instructions
14 AMC Pro 7725106 - v.01 - 05062019
To Next Page
Loading...
Need help?
General
