2.4.Charging and wearing
2.4.1. Charging
(1) Please fully charge the watch when the first time using the watch.
(2) Please patiently get charged for more than 10 minutes when the watch was exhausted.
(3) Sometimes, the watch's screen will not turn on immediately when start to charge after it runs out of
power.
(4) Please use a 5V-200mA adapter. Fast charging is not available in all regions.
(5) The battery life may vary according to the settings, operation conditions, and other factors. So the
actual result may differ from the laboratory data. Typically use 10 days. 3 days usage with BT calling.
Typical usage scenario:
(1) Use the bulit-in watch faces and the default setting.
(2) Heart rate 24h monitoring is enabled;
(3) sleep monitoring is enabled;
(4) 50 pushed messages a day;
(5) raise wrist to see watch time 100 times;
(6) test blood-oxygen 2 times per day;
(7) workout 2 times a week for 30 minutes at a time.
2.4.2. Wearing
(1) How to wear
1) Put the watch on your arm with the display facing up.
2) Thread the band through the buckle.
3) Insert the stick into the small hole of the band with a comfortable position on your wrist
and fix it.