-13-
9.0 CHARGING
USB Adapter
(5V/1A)
Power Bank
Computer USB Port
Before charging, please read the introduction of the “Use of
Battery” section of the “Safety Guidelines” carefully!
1) When the drone battery runs low, the indicator lights on the drone
will blink continuously.
2) Connect the battery with the USB charging cable.
3) Plug the USB charging cable into a USB charging port on the
computer, power bank, or USB adapter (5V/1A).
4) When the battery is charging, the indicator light on the USB
charging cable is red.
When the battery is charged, the indicator light on the USB
charging cable turns green.
5) The charging time is about 90 minutes.