-15-
11.0 OPERATION GUIDE
Long Press
11.1 Pairing
All of the following operations on this manual uses MODE 2.
① Long press the Power Switch to
turn on the drone. The indicator
lights of the drone will keep flashing.
② Place the drone on a flat and
level surface with the head forward
and the tail facing towards the pilot.
③ Long press the Power Switch to
turn on the transmitter, and you
will hear the “DiDi” sound, then the
indicator lights keep flashing.
④ Push the left joystick up then
down to pair the drone with the
transmitter. The indicator lights on
the drone will turn solid if the drone
is paired successfully.
Long Press
Head
Tail
To Next Page
Loading...
