-16-
11.2 Calibrating the Gyro
Tip:
To ensure a stable flight, we suggest that the pilot calibrate the
gyro after pairing the drone or after a crash.
Simultaneously push the left joystick and the right joystick to the bottom
right corner to calibrate the gyro. The indicator lights on the drone will
blink and turn solid, and the transmitter will send out a long “Di” sound,
which indicates the calibration is completed.
11.3 Unlocking/Locking the Motors
Unlocking the Motors: As shown above, push the left joystick to the
bottom right corner and the right joystick to the bottom left corner at
the same time to unlock the motors. The motors will start to spin.
Locking the Motors: Repeat this operation. The motors will stop
immediately.
To Next Page
Loading...
