Deerc D65 - Page 17

12
2.2 Pre-Flight Preparations >>
OPERATION GUIDE / 2
Propellers
The drone will not fly unless the correct
propeller is installed on the correct
motor shaft. Each propeller is labeled
with either an "A" or "B" on it. Secure the
propeller onto the motor shaft using
screws, turning each screw clockwise.
The drone will not fly unless the correct
propeller is installed on the correct
motor shaft. Each propeller is labeled
with either an "A" or "B" on it. Secure the
propeller onto the motor shaft using
screws, turning each screw clockwise.
For propeller removal, use a screwdriver
(provided)torotatethescrewscounter-clock-
wiseandremovethepropellers.Besuretohold
themotorwhiledetachingthepropeller.
For propeller removal, use a screwdriver
(provided)torotatethescrewscounter-clock-
wiseandremovethepropellers.Besuretohold
themotorwhiledetachingthepropeller.
Installation: Removal:
· Please check that the propellers are properly installed and tightened before each flight.
· Exercise caution when attaching/detaching the propellers to prevent any cuts or injuries.
· Thepropellersareinstalledbeforethedroneispackagedatthefactory.
A B
B A
A
HEAD
A